Ether IO 24 R
Release Date 11thApril 2008
Shipping Date: 14th April 2008
The Ether I/O 24 R is an UDP/IP controlled digital Input/Output module. The module features three 8-bit ports with 5V level signal lines. Each of the 24 lines can be independently programmed as either an input or output.
The module connects to any Ethernet network supporting the TCP/IP protocol suite and can communicate with any point on that network. By connection with an Internet Router the device can communicate with any Internet connected device
.
Ether I/O 24 R User Manual
Ether
I/O 24 R Product Preview
Download
Elexol Product Catalogue
Blue
Cable
The
Elexol "Blue
Cable" Solution is a powerful new
message-on-hold player designed specifically
for connection to a client's PABX system
and network with Internet access.
Messages can be uploaded/updated by the
Service Provider to an Internet based
File Server, no matter where they are
located, without client involvement.
This
solution eliminates the costly need for
the Service Provider to record and distribute
message updates by tapes and CD and then
having to ensure their correct and timely
installation by the client.
CLICK
HERE to download the Blue Cable datasheet
USB I/O 24 R
RoHS
Declaration USBIO24R
The
USBIO24
R is the ROHS Compliant version of
our previous USB I/O 24 range.
The USB I/O 24 R is a low-cost integrated
module for the input and/or output of
digital signals from a computer system
by connection to the USB port.
The modules I/O Port pin out and firmware
are compatible with the previous versions
of the USB I/O24 modules.
ENHANCEMENTS
Integrated
Clock Circuit, Integrated EEPROM, Lower
Supply Voltage, Integrated Level Converter
on FIFO Interface and Control Signals
and FTDIChip-IDT An application note describing
this feature is available separately from
the FTDI
website .
CLICK
HERE to download the USBIO24R datasheet
USB
232R
USB232R
- USB to Serial UART Development Module
The
USB232R is the latest RoHS compliant,
low-cost integrated module for transferring
data to / from a peripheral to a host
PC. The module is based on the FT232R
USB to serial UART IC from FTDI.
CLICK
HERE to download the USB232R datasheet
USB
245R
USB245R
- USB to Parallel FIFO Development Module
The
USB245R is the latest RoHS compliant,
low-cost integrated module for transferring
data to / from a peripheral to a host
PC. The module is based on the FT245R
USB to Parallel FIFO IC from FTDI.
CLICK
HERE to download the USB245R datasheet.
USB
I/O 24 DIP
The
USB I/O 24 DIP R shown in Diagram 1
is the ROHS Compliant version of our
previous USB I/O 24 DIP of which differences
will be outlined in a section below.
The module retains the 50 pin Dual Inline
Package (DIP) and fits into a standard
50 pin 900mil wide IC Socket. This makes
the USB I/O 24 DIPR ideal for rapid
prototyping and development work
USB
I/O24 Dip is Supplied with a 50 Pin
900mil IC Socket,
Extra ones available
Ether
I/O 24
Click
Photo for full size
Click
Here for Datasheet
Click
Here for User Manual
The
Ether
I/O 24 is an UDP/IP controlled digital
Input/Output module. The module features
three 8-bit ports with 5V level signal
lines. Each of the 24 lines can
be independently programmed as either
an input or output.
The
module connects to any Ethernet network
supporting the TCP/IP protocol suite
and can communicate with any point on
that network. By connection with
an Internet Router the device can communicate
with any Internet connected device.
Ether
I/O 24 Test and Programming Utility
Click
Photo for full size
Click
Here Ether I/O 24 Test
and Programming Utility
Click
Here User Manual for Test
and Programming Utility
Click
Here for more information
For any other information regarding
the release of these products please contact
us via email at enquiries@elexol.com
|
