Set out very briefly below are the basic steps to be taken by a Service Provider in setting up a user:

• Service Provider produces audio/message program for client and installs it on his (Service Provider's) PC
• Using the powerful Blue Cable Manager Software provided, the Service Provider uploads the audio message to the FTP Server, then plugs in the Blue Cable unit and allows the unit to download the audio files.   This allows the unit to be sent to the client fully loaded with the client's initial audio program.
• Service Provider then sends the Blue Cable unit to the client.
• Client connects unit to there: PABX with an audio cable, Network with the data cable and to his power outlet using the Universal Power Pack. (Note: data cable and power pack, together with installation instructions, are supplied with the Blue Cable unit)
• Client turns on Power and the Blue Cable initiates itself.
• From this point on the Blue Cable unit functions automatically, requiring no client interaction other than simple volume control if necessary.
• To update the client's audio program, the Service Provider simply uses the Blue Cable Management software to upload the relevant files to the FTP Server.    The Blue Cable unit will then automatically download the new program.