The Ether I/O 24 is an UDP/IP controlled digital Input/Output module. The module features three 8-bit ports with 5V level signal lines. Each of the 24 lines can be independently programmed as either an input or output.

The module connects to any Ethernet network supporting the TCP/IP protocol suite and can communicate with any point on that network. By connection with an Internet Router the device can communicate with any Internet connected device

• Supports ARP, BOOTP, DHCP, ICMP and UDP/IP Protocols
• Industry standard 10BaseT Ethernet Interface with an industry standard RJ-45 Connector
• 24 independently programmable signal lines with configurable CMOS, TTL or Schmitt Trigger thresholds and programmable pull-ups per line
• Easy connection by three 10 way box headers to suit low cost, standard IDC or Crimp connectors
• Integrated Switch Mode Voltage Regulator allows power from any 8-32V DC Power source
• User 5V 500mA output to power external Interface boards or sensors
• Compact module measures only 72mm x 72mm x 24mm
• Advanced configuration allows the modules to automatically scan the input ports and transmit
  changes directly to another ETHER I/O 24 module without host connection or to any Internet Port
  by router connection
• On board EEPROM allows all ports to power up in a user programmable state
• Programmable Fixed IP or Dynamic IP assignment from a DHCP server
• Small packet size and connectionless protocol allows for Real Time sensing and control
• Can be connected to a wireless network gateway or access point for wireless operation
• 
  Low Power consumption only 1.1W fully operational

APPLICATIONS

• Home or Industrial Automation
• Digital Input and Output from any Networked PC
• Remote Data Acquisition and/or Alarm Monitoring by Network or Internet
• PC Controlled Machines and Distributed Machine I/O
• Remote Lighting / Power control and/or monitoring

           Click Here Ether I/O 24 Test and                                  Programming Utility

           Click Here User Manual for Test And                          Programming Utility

USBIO24 R Digital I/O Module

The USBIO24 R is the ROHS Compliant version of our previous USB I/O 24 range.   The USB I/O 24 R is a low-cost integrated module for the input and/or output of digital signals from a computer system by connection to the USB port.   The modules I/O Port pin out and firmware are compatible with the previous versions of the USB I/O24 modules.  

The module features 24 5V level signal lines individually programmable as input or output.   As the module connects to the USB port, multiple modules can be connected to a single PC by the use of a USB hub or hubs.   Each module features a serial number and the PC can identify each module uniquely allowing for multiple modules to be connected for a single application.   The outputs of the module are able to source or sink up to 30mA per I/O, up to a maximum 50mA per port, to allow for direct connection to a variety of devices.

• 24 independently programmable Input / Output Pins Grouped into 3 ports.
• Single module High-Speed Digital Input / Output solution.
• Integrated Type-B USB Connector.
• On-board unique serial number and custom programmable FLASH microcontroller.
• Both USB Enumeration information and Microcontroller can be re-programmed to suit customer needs.
• Module powered by the USB from the PC or by an external power supply.
• Virtual COM Port driver allows access as a regular serial port.
• Optional DLL based driver available.
• Easy to program using popular development languages C, Basic, Delphi, VB, etc.
• Simple command set for easy control of ports and data transfer.

The USB I/O 24 DIP is a Dual Inline Package version of the USB I/O 24 module. The module's 50 pin Dual Inline Package (DIP) fits into a standard 50 pin 900mil wide IC Socket. This makes the USB I/O 24 DIP ideal for rapid prototyping and development work.

The module features 24 5V level signal lines individually programmable as input or output. As the module connects to the USB port, multiple modules can be connected to a single PC by the use of a USB hub or hubs. Each module features a serial number and the PC can identify each module uniquely thereby allowing for multiple modules to be connected for a single application.   The outputs of the module are able to source or sink up to 30mA per I/O, up to a maximum 50mA per port, to allow for direct connection to a variety of device.

USB I/O24 Dip is supplied with a 50Pin 900mil IC socket, Extra ones available

• Single module High-Speed Digital Input / Output solution.
• Integrated Type-B USB Connector.
• On-board unique serial number in EEPROM and custom programmable FLASH microcontroller.
• Both USB Enumeration information and Micro controller can be re-programmed.
• Module powered by the USB from the PC (default option) and can also be configured for Self powered.
• 50-pin Dual In-Line Package Ideal for prototyping.
• Fits into a standard 50-pin 900mil IC Socket
• Virtual COM Port driver allows access as a regular serial port.
• Optional DLL based driver available.
• Easy to program from popular languages C++, Basic, Delphi, etc.
• Simple command set for easy control of ports and data transfer.

• This module combines the power of USB and a Ubicom SX52
• The module offers 3 x 8 bit programmable I/O ports
• Supplied firmware allows the ports to be individually pin programmed as inputs or outputs
• Firmware can be developed for this module for application specific tasks

CLICK HERE to view Elexol Articles,

Reviews and Quotes Section

The I/O 24 Relay Output Board can be connected to I/O port of the modules to provide 8 Isolated relay contact outputs suitable for a variety of loads.

• 8 x Form C type Relays   Rated at 5A @ 240VAC with  a 12V Coil
• LED indication for relay status
• Screw Terminal Blocks for Relay outputs
• Easy connection by 0.1” pitch 10-way box header to suit standard IDC connectors for connection to the I/O port on the I/O 24 Modules
  

The I/O 24 Combo Board can be connected to  the I/O port of the modules to provide 4 Isolated relay contact outputs suitable for a variety of loads and 4 Opto Isolated inputs.

• 4 x Opto Insulated Inputs for each of the I/O24 port pins
• 4 x Form C type Relays   Rated at 5A @ 240VAC with  a 12V Coil
• LED indication for relay and opto status
• Screw Terminal Blocks for Opto inputs
• Easy connection by 0.1” pitch 10-way box header to suit standard IDC connectors for connection to the I/O port on the I/O 24 Modules
  

The I/O 24 Opto Input Board can be connected to  the I/O port of the modules to provide 8 Opto Isolated inputs.

• 8 x Opto Insulated Inputs for each of the I/O24 port pins
• LED indication for opto status
• Screw Terminal Blocks for Opto inputs
• Easy connection by 0.1” pitch 10-way box header to suit standard IDC connectors for connection to the I/O port on the I/O 24 Modules
  

The I/O 24 Connector/LED Board can be connected to the I/O port of the modules to provide screw terminal connections with the optional added functionality of either pull up or pull down resistors as well as LED indication of the PORT Status

• LED indication for port status
• Option of either using pull up or pull down resistor on the I/O's of the modules
• Screw Terminal Blocks
• Easy connection by 0.1” pitch 10 way box header to suit standard IDC connectors
  

The I/O 24 Connector Board can be connected to the I/O port of the modules to provide 8 switch/push buttons with LED indicators showing the status of the I/O pin.

• 8 Tact Push Button switches & 8 Slide switches
• LED indication of I/O status
• Easy connection by 0.1” pitch 10 way box header to suit standard IDC connectors
  

The I/O 24 ULN2803 Switch Board shown below in diagram 1 is a very useful accessory board that allows much higher voltage and current devices to be interfaced to the low level logic provided by the I/O24 modules.

• 1 x ULN2803 High Voltage / High Current Transistor Array
• Indication LED's for channel status
• Screw Terminal Blocks for outputs
• Easy connection by 10-way box header to suit standard IDC connector for connection to the I/O port
• 72mm Standard width for DIN Rail Modules
• Dimensions – 2.6 X 2.8 X 1 inches (65 X 72 X 25.4mm)

The I/O 24 50 Pin IDC

Connector Board can be connected to the I/O ports of the module to provide a 50 Pin IDC Connector interface to the I/O 24 device for industrial purposes

• Easy connection by 0.1” pitch 10 way box header to suit standard IDC connectors

 

• Book written by Peter Bates and Published by Babini Computer Books, that details applications and usage of the USB I/O24 module

  www.babanibooks.com

  Book Available from Jaycar Australia