Sunday, 20th January 2019 

Ether IO24 PIC R DIP

Ether I/O

The ETHER I/O 24 DIP R shown in Diagram 1 is the Dual In-Line Package equivalent of our existing Ether I/O 24 R. 


The Ether I/O 24 is an integrated, micro-controller based network interface board with 24 digital user I/O lines. The module’s firmware and hardware enable your devices or other modules to be connected to a generic Ethernet network and controlled using a command sent over the network via UDP.  Each of the 24 User I/O lines operates at 5V DC maximum levels and can be independently programmed as an Input whose state can be remotely sensed via another network device, an Input whose state is internally checked and transmitted when a change occurs, or an output whose state can be remotely controlled by another networked device.

 The outputs of the module are able to source or sink up to 30mA per I/O, up to a maximum 50mA per port, to allow for direct connection to a variety of devices.


  • Supports ARP, BOOTP, DHCP, ICMP and UDP/IP Protocols
  • Industry standard 10BaseT Ethernet Interface with an industry standard RJ-45 Connector
  • 24 independently programmable signal lines with configurable CMOS, TTL or Schmitt Trigger thresholds and programmable pull-ups per line
  • 50-pin Dual In-Line Package Ideal for prototyping
  • Compact module Fits into a standard 50-pin 900mil IC Socket (69mm x 25.2mm x 21mm)
  • Advanced configuration allows the modules to automatically scan the input ports and transmit changes directly to another ETHER I/O module without host connection or to any Internet Port by router connection
  • On board EEPROM allows all ports to power up in a user programmable state
  • Programmable Fixed IP or Dynamic IP assignment from a DHCP server
  • Small packet size and connectionless protocol allows for Real Time sensing and control
  • Can be connected to a wireless network gateway or access point for wireless operation
  • Low Power consumption only 1.1W fully operational


  • Home or Industrial Automation
  • Digital Input and Output from any Networked PC
  • Remote Data Acquisition and/or Alarm Monitoring by Network or Internet
  • PC Controlled Machines and Distributed Machine I/O
  • Remote Lighting / Power control and/or monitoring

test app

Ether I/O 24 RTest and Programming Utility

Data Sheets and Utility

Another quality website by 24Seven Media