The
USBMOD5 is a integrated module based
on the FTDI FT2232C Dual Channel USB
UART / FIFO IC. The module features
two Multi-purpose UART/FIFO controllers
that can be configured in several
different modes depending on the application.
-
Single
module Dual Channel UART/FIFO
USB solution
-
Based
on the FTDI FT2232C Dual Channel
USB UART / FIFO IC
-
On-board
6MHz Crystal
-
External
EEPROM on board for USB enumeration
data
-
No
external passive components required
-
40-pin
Dual In-Line Package Ideal for
prototyping
-
Fits
into a standard 40-pin 600mil
IC Socket
-
Transfer
Data Rate 300 to 1 Mega Baud (RS232)
-
Transfer
Data Rate 300 to 3 Mega Baud (TTL
and RS422 /RS485)
-
Auto
Transmit Enable control for RS485
serial applications using TXDEN
pin
-
FT245BM-style
FIFO interface option with bi-directional
data bus and simple 4-wire handshake
interface
-
Enhanced
Bit-Bang Mode interface option
-
New
Synchronous Bit-Bang Mode interface
option
-
New
CPU-Style FIFO Interface Mode
option
-
New
Multi-Protocol Synchronous Serial
Engine (MPSSE) interface option
-
New
MCU Host Bus Emulation Mode option
-
New
Fast Opto-Isolated Serial Interface
Mode option
-
Interface
mode and USB Description strings
configurable in external EEPROM
-
EEPROM
Configurable on board via USB
-
Support
for USB Suspend and Resume conditions
via PWREN#, and SI /WU pins
-
Support
for bus powered, self powered,
and high-power bus powered USB
configurations
-
Integrated
Power-On-Reset circuit, with optional
Reset input and Reset Output pins
-
5V
and 3.3V logic IO Interfacing
with independent level conversion
on each channel
-
Integrated
3.3V LDO Regulator for USB IO
-
Integrated
6MHz – 48Mhz clock multiplier
PLL
-
USB
Bulk or Isochronous data transfer
modes
-
4.35V
to 5.25V single supply operating
voltage range
-
UHCI
/OHCI /EHCI host controller compatible
-
USB
2.0 Full Speed (12 Mbits /Second)
compatibl
-
Compact
48-LD LQFP package
